HB 90 Parts Washer
HB 90 Parts Washer
- Work Conditions
- Technicial Specifications
- Working Principle of the Machine
- Electrical - Electronic Equipment
The machine should be able to operate smoothly between 0 ° C and + 60 ° C ambient temperature. It shall also operate without any problems under intense damp and dusty working conditions.
|
Machine Outer Dimensions Width/ Lenght / Height |
900 x 920 x 1100 mm |
|
Washing Cabinet Internal Dimensions Width/ Lenght / Height |
820 x 820 x 650 mm |
|
Washing Basket Dimensions Ø |
750 mm |
|
Loading Height |
450 mm |
|
Basket Capacity |
200 kg |
|
Pump Pressure |
2,6 bar x 20 ton/hour - 1 piece |
|
Pump Power |
1,2 hp |
|
Pump / Reductor |
PRC / PRC |
| Total Number of Nozzles |
50 pcs |
|
Heater Power |
7,5 kw |
|
Electricity (V/phase) |
380 V / 3 |
|
Heat Insulation System |
---------- |
| Cover Safety System |
Standard |
|
Basket Stop System |
---------- |
| Contact System |
Standard |
|
Thermal and Engine Protections |
---------- |
|
Digital Timer |
0-90 min |
|
Digital Thermostat |
0-120 oC |
|
Cover Opening System |
Damper |
|
Body Structure |
AISI Chrome Single Boiler |
|
Tank Volume |
120 lt |
|
Machine Total Weight |
120 kg |
- When the digital thermostat drops 5 degrees below the temperature set, it automatically switches on and can be increased or decreased by 1%.
- The basket has a rotating structure inside the machine.
- Detergent water is sprayed from all sides of the basket by means of fixed nozzles. Our machine has 1 pump and 2 nozzle lines.
- Washing cabinet can take up 60 liters of water. The water is suctioned and sprayed to the nozzle line through pumps. Pumps have filters located in where they perform suction to keep small particles.
- The hot water is in the water tank inside the machine and is heated by a 5 kW resistor.
Electricity 380 V-50 Hz. 3 phases. Cables are manufactured as normal antigron electrical installation ABN.