HB 2100 P Euro Parts Washer

The machine should be able to operate smoothly between 0 ° C and + 60 ° C ambient temperature. It shall also operate without any problems under intense damp and dusty working conditions.

Machine Outer Dimensions Width/ Lenght / Height	2100 x 2600 x 2000 mm
Washing Cabinet Internal Dimensions Width/ Lenght / Height	1950 x 1950 x 1000 mm
Washing Basket Dimensions Ø	1700 mm
Loading Height	550 mm
Basket Capacity	3000 KG
Pump Pressure	6,6 bar x 40 ton/hour - 3 pieces
Pump Power	2 hp
Pump / Reducer	Rekparsan / Yılmaz Redüktör
Total Number of Nozzles	200 pcs
Heater Power	45 kw
Electricity (V / phase)	380 V / 3
Heat Insulation System	Standard
Cover Safety System	Standard
Basket Stop System	Automatic
Contact System	Standard
Thermal and Engine Protections	Standard
Digital Timer	0-90 min
Digital Thermostat	0-120 oC
Body Structure	AISI Chrome Double Boiler
Tank Volume	300 lt
Machine Total Weight	1100 kg
Loading Car	Standard
Cover Opening System	Pneumatics
Basket Load Control System	Standard
Pneumatic Installation	Steel
Pneumatic Equipments And Regulating Valves	Two Way Valve Mag

The machine is manufactured from a double boiler system and has a reinforced body structure. It is only produced by REKPARSAN A.Ş. in Turkey.

Mechanical components shall meet DIN 5510 / Part 2 (Fire and smoke).
The utilization period of the machine shall be at least 30 years. The materials used in the machine shall be new, suitable for the intended use and in accordance with internationally accepted standards. UIC, IEC, DIN, NF, BS or corresponding standards are used.
The protection class of the machine shall be at least IP 54.

When the digital thermostat drops 5 degrees below the temperature set, it automatically switches on and can be increased or decreased by 1%.
The basket has a rotating structure inside the machine.
Detergent water is sprayed from all sides of the basket by means of fixed nozzles. Our machine has 2 pump and 5 nozzle lines.
Washing cabinet can take up 300 liters of water. The water is suctioned and sprayed to the nozzle line through pumps. Pumps have filters located in where they perform suction to keep small particles.
The hot water is in the water tank inside the machine and is heated by 3 45 kW resistor.

Electricity 380 V-50 Hz. 3 phases. Cables are halogen-free panels and all electrical installations are manufactured in accordance with CE and European norms with IP 54 features. The entire electrical system of the machine shall be produced by SIEMENS.